Skip to content
Physical AI Laboby DigiRise
OliImage

Image source: limxdynamics.com

HumanoidShippingVisited Fall 2026
🇨🇳 LimX Dynamics(逐际动力)

Oli

A 165 cm, 31-DoF general-purpose humanoid with separate motion-control (RK3588) and perception (Jetson Orin NX) computers and a slide-out battery module.

Estimated price

From ≈ ¥3.3M

Published currency: CN¥158,000 +

Reported
Reported base price from RMB 158,000 (about USD 21,800) at launch in August 2025. Configuration, tax and shipping unconfirmed; not on the official storeroboticsandautomationnews.com

Published prices converted at USD 1 = JPY 150, CNY 1 = JPY 21, EUR 1 = JPY 165 for reference. Tax, shipping, duties, support and certification differ by source, so we quote the landed total in Japan.

Ask about this robot

Key specs

Form factorHumanoid
StatusShipping
Height165 cm
Weight55 kg
Degrees of freedom31
Payload3 kg
Reach700 mm
Runtime~1.5 h
Top speed1.39 m/s(5.0 km/h)
Other≤55 kg, 9,500 mAh battery, up to 3 kg per arm, up to 5 km/h, 150 N·m peak joint torque, 70 cm arm length (official)

Specs are based on maker publications and press reports; real performance depends on configuration and environment. Prices vary with exchange rates, configuration, shipping, duties and support, so we provide final figures by quote.

Good fit for

  • Humanoid R&D
  • Task trials in automotive plants
  • Demos and exhibitions

MAKER

LimX Dynamics逐际动力

🇨🇳 China ・ Shenzhen ・ Founded 2022

Shenzhen developer known for legged-robot motion control

Learn more

Case studies

Education & researchAnnounced🇯🇵 Japan ・ 2026

Tohasen Robotics partners with LimX in Japan

Announced Aug 31, 2026. Tohasen supplies products such as the TRON series in Japan and supports sensor selection, software development and PoCs. It is not described as an exclusive distributor.

LimX Dynamics ・ TRON 1 ・ Tohasen Roboticstohasen-robotics.com
AutomotivePoC🇨🇳 China ・ 2025

Joint embodied-AI lab with SAIC Beijing for automotive

In July 2025 the two set up a joint lab to develop humanoid applications for automotive manufacturing, logistics and supply chain. It is at the technology validation stage, not volume deployment.

OtherAnnounced AE ・ 2026

Humanoid pilots in Abu Dhabi expected in 2026

At Bridge Summit in December 2025 a LimX executive said it expects pilots in Abu Dhabi venues such as malls and restaurants to begin in 2026. No customer or launch has been confirmed.

More from LimX Dynamics

TRON 1Image
Biped / wheel-legVisited
🇨🇳 LimX Dynamics ChinaShipping

TRON 1

A research biped with swappable point-foot, sole and wheel configurations, used for locomotion and reinforcement learning research and education.

Official price (est.)
≈ ¥2.3M – ¥3.8M
TRON 2Image
Mobile manipulatorVisited
🇨🇳 LimX Dynamics ChinaShipping

TRON 2

A multi-form robot combining 7-DoF dual arms with legged or wheeled lower bodies, supporting teleoperation for data collection.

Reseller price (est.)
From ≈ ¥4.9M
LunaImage
HumanoidVisited
🇨🇳 LimX Dynamics ChinaShipping

Luna

A 160 cm, 27-DoF humanoid for performance and interaction, with swarm control synchronizing 200+ units.

Price
Quote only

Similar robots

GR-3Image
Humanoid
🇨🇳 Fourier ChinaPilot

GR-3

Care-focused humanoid unveiled in 2025 with 55 DoF, soft exterior and expressive interaction. Targeted at guidance, rehab assistance and cognitive training; shown at CES 2026.

Price
Quote only
GR-2Image
Humanoid
🇨🇳 Fourier ChinaShipping

GR-2

R&D humanoid launched in September 2024: 175 cm, 53 DoF, dexterous hands and an open developer platform.

Price
Quote only
Booster K1Image
Humanoid
🇨🇳 Booster Robotics ChinaShipping

Booster K1

Entry-level developer humanoid, about 95 cm tall and 19.5 kg. Ships with built-in agents such as soccer and conversation, and gets back up by itself after a fall.

Reported (est.)
From ≈ ¥838K
Booster K1 ProImage
Humanoid
🇨🇳 Booster Robotics ChinaShipping

Booster K1 Pro

Higher-spec K1 with NVIDIA Jetson AGX Orin 32GB (200 TOPS) and a stereo depth camera. Sold in Japan by Switch Science.

Reseller price (est.)
From ≈ ¥2.7M

Not sure which robot fits? That's fine.

Just tell us what you want to do — move parts in a factory, automate inspection rounds. We'll propose robots, a quote and a development plan.

Get a free consultation

We usually reply within 2 business days