Skip to content
Physical AI Laboby DigiRise
G1Image

Image source: unitree.com

HumanoidMass productionVisited Fall 2026
🇨🇳 Unitree Robotics(宇树科技)

G1

A compact 132 cm, ~35 kg humanoid. The EDU version (23–43 DoF) is required for secondary development.

Estimated price

≈ ¥2M – ¥3.2M

Published currency: $13,500 – $21,500

Official price
Official store: G1 USD 13,500, G1 Pro USD 21,500 (excl. tax and shipping). EDU by quote. Japanese university procurements were about JPY 6.6–10.4M in 2024 for full setsshop.unitree.com

Published prices converted at USD 1 = JPY 150, CNY 1 = JPY 21, EUR 1 = JPY 165 for reference. Tax, shipping, duties, support and certification differ by source, so we quote the landed total in Japan.

Ask about this robot

Key specs

Form factorHumanoid
StatusMass production
Height132 cm
Weight35 kg
Degrees of freedom23
Payload2 kg
Runtime~2 h
Other9000 mAh quick-release battery, ~2 kg arm load (EDU ~3 kg), knee peak torque 90 N·m (EDU 120 N·m)

Specs are based on maker publications and press reports; real performance depends on configuration and environment. Prices vary with exchange rates, configuration, shipping, duties and support, so we provide final figures by quote.

Good fit for

  • R&D and education
  • Airport baggage handling trials
  • Customer engagement with conversational AI

MAKER

Unitree Robotics宇树科技

🇨🇳 China ・ Hangzhou ・ Founded 2016

Global leader in affordable quadrupeds and humanoids

Learn more

Case studies

LogisticsPilot🇯🇵 Japan ・ 2026

JAL and GMO trial G1 for baggage and cargo handling at Haneda

A trial launched in May 2026 and running through 2028, in which G1 robots move baggage and cargo alongside ground staff, including pushing cargo onto conveyors, with permanent deployment as a possible goal.

Education & researchDemo🇯🇵 Japan ・ 2026

Kyoto University team builds 'Buddharoid' on G1

Kyoto University's Kumagai Lab, Teraverse and XNOVA put the Buddhist dialogue AI 'Buddhabot' on G1, published in February 2026. It is an R&D case, not routine commercial operation.

Education & researchIn production🇯🇵 Japan ・ 2024

Osaka University procures a G1 R&D Ultimate set

On Oct 17, 2024 Osaka University contracted a G1 R&D Ultimate set from Tohasen Robotics for JPY 10,429,100. Tohoku University also contracted a G1 R&D Standard set via TechShare for JPY 6,605,500 in September 2024.

More from Unitree Robotics

H2Image
HumanoidVisited
🇨🇳 Unitree Robotics ChinaShipping

H2

A full-size 182 cm, ~70 kg, 31-DoF humanoid whose arms handle about 7 kg rated and 15 kg peak.

Official price (est.)
From ≈ ¥4.5M
R1Image
HumanoidVisited
🇨🇳 Unitree Robotics ChinaShipping

R1

A low-cost 123 cm, ~27–29 kg humanoid for education and entry-level use.

Official price (est.)
≈ ¥735K – ¥885K
Go2Image
QuadrupedVisited
🇨🇳 Unitree Robotics ChinaMass production

Go2

A ~15 kg compact quadruped in AIR, PRO, X and EDU versions, widely used for research, education and patrol trials.

Official price (est.)
≈ ¥240K – ¥675K
B2Image
QuadrupedVisited
🇨🇳 Unitree Robotics ChinaShipping

B2

An IP67 industrial quadruped with high speed and heavy payload, for power inspection, rescue and industrial inspection.

Reseller price (est.)
From ≈ ¥15.8M

Similar robots

GR-3Image
Humanoid
🇨🇳 Fourier ChinaPilot

GR-3

Care-focused humanoid unveiled in 2025 with 55 DoF, soft exterior and expressive interaction. Targeted at guidance, rehab assistance and cognitive training; shown at CES 2026.

Price
Quote only
GR-2Image
Humanoid
🇨🇳 Fourier ChinaShipping

GR-2

R&D humanoid launched in September 2024: 175 cm, 53 DoF, dexterous hands and an open developer platform.

Price
Quote only
Booster K1Image
Humanoid
🇨🇳 Booster Robotics ChinaShipping

Booster K1

Entry-level developer humanoid, about 95 cm tall and 19.5 kg. Ships with built-in agents such as soccer and conversation, and gets back up by itself after a fall.

Reported (est.)
From ≈ ¥838K
Booster K1 ProImage
Humanoid
🇨🇳 Booster Robotics ChinaShipping

Booster K1 Pro

Higher-spec K1 with NVIDIA Jetson AGX Orin 32GB (200 TOPS) and a stereo depth camera. Sold in Japan by Switch Science.

Reseller price (est.)
From ≈ ¥2.7M

Not sure which robot fits? That's fine.

Just tell us what you want to do — move parts in a factory, automate inspection rounds. We'll propose robots, a quote and a development plan.

Get a free consultation

We usually reply within 2 business days